cens logo

Machinery Tool in the Recovery in 2020

Feb 03, 2020 | By CENS

As the U.S.-China trade friction comes to an end, and the effect of the second production base in Southeast Asia is gradually fermenting, Taiwan's machinery industry is expected to see Chunyan in the second quarter, and the machine tools will warm up month by month from the second half of the year. The director of the Taiwan Machinery Association Chang Ke Baxi expects that the export value of machinery and machine tools will increase by about 10% throughout the year.

The picture shows the operation status of the machinery industry plant. (Photo provided by UDN)The picture shows the operation status of the machinery industry plant. (Photo provided by UDN)
However, with the recent spread of the pneumonia epidemic in Wuhan, industry players have continued to pay attention to whether it will affect the global economic development. If it impacts end-use consumption, it may suppress the strength of the industrial recovery.
The upstream performance of machine tool upstream plants in December last year was generally better than expected. Local investment advisors are optimistic. As the decline in Japanese machine tool orders has not expanded, the economy has shown signs of bottoming out, and the decline in the amount of machine tool orders from China has also decreased significantly. .

The market believes that with the US and China reaching the first phase of the agreement, demand will pick up, which will help the operating performance of machine tool factories continue to pick up. According to the legal person, Yadeke-KY, a leading component manufacturer of pneumatic components upstream of machine tools, was driven by existing customers' degree of automation and the demand for 5G base station equipment in China. In December last year, revenue increased by 24% for five consecutive months. It is growing, and it is also growing in parallel with the trend throughout the year, and it has performed most brilliantly in the industry.

Transmission components manufacturers, such as Yinde, Zhide, and Global Transmission, were dragged down by the downstream machine tool industry 's demand, which has not seen a clear recovery, and the inventory is still high. The annual revenue growth rate in December last year declined by about 20%. Although the performance was still not satisfactory, but Also better than expected.

Looking forward to this year, Yadeke is more optimistic, pointing out that the current market demand is recovering due to the increase in customer's existing production capacity and automation, and the increase in demand for 5G-related parts and components. The legal person estimates that the annual performance of Yadeke is expected to increase by 10% and continue to reach a new high.

Shanghai Banking Group President Zhuo Yongcai pointed out that the Bank will see Chunyan at the end of the first quarter, and the performance is expected to rise quarter by quarter from the second quarter. The first half is better than the same period last year, and the second half will be better than the first half. In response, the Bank of Japan 's Kobe Plant investment case has been scheduled to start construction in the first half of the year.

The machine tool maker Cheng Tai recently returned orders from the United States and Turkey. The products are mainly turning and milling compound, vertical turning and core-type processing machines. The order in hand is about 800 million yuan. Visibility sees March; On the other hand, mainland China is the mainstay, including large-scale models such as gantry, horizontal boring, etc., with orders in hand of 1.2 billion yuan. Visibility sees April.

Cheng De Group Chairman Yang Dehua said that the machine tool industry has been boring for a year. With the inventory gradually depleted, recently large American customers have started to place orders, and small and medium-sized customers will follow up. Although the order strength is not strong, but You can clearly feel that market confidence is gradually stabilizing.

Gao Feng 's recent enquiries from South Korea and China have warmed. Currently, orders across the Taiwan Strait are 380 million yuan. The visibility of orders is at the end of the first quarter. Chairman Shen Guorong expects this year 's performance to improve from the second quarter.

Industry Reports

GM unveils new electric vehicle platform to take on Tesla</h2>

GM unveils new electric vehicle platform to take on Tesla

Mar 05, 2020

As the automotive industry shifts to electric vehicles, General Motors (GM) is holding an "Electric Vehicle Day" event in an attempt to convince investors that this century-old automaker can compete with Tesla, an electric vehicle manufacturer. Ford will also launch the electric version of the commercial van "Transit" as soon as next year. GM will hold an "Electric Vehicle Day" event on the 4th,...

Taiwan's Hardware Industry Buoyed by New Intelligent Manufacturing Demonstration Field</h2>

Taiwan's Hardware Industry Buoyed by New Intelligent Manufacturing Demonstration Field

Mar 02, 2020

Taiwan's mold & die industry features excellent technology as well as competitive quality and price. In order to move towards intelligent manufacturing, the Industrial Development Bureau (IDB) of the Ministry of Economic Affairs commissioned the Metal Industries Research and Development Centre (MIRDC) to set up an Intelligent Manufacturing Demonstration Field for the Stamping Die Industry to atta...

Taiwanese Machinery Not Effected by the Novel Coronavirus</h2>

Taiwanese Machinery Not Effected by the Novel Coronavirus

Feb 24, 2020

The pneumonia epidemic in Wuhan, China continues. The Industrial Research Institute of Obstetrics International pointed out that the proportion and amount of Taiwanese industrial machinery products using from mainland China components are extremely low and can be obtained from Taiwan or other countries. The epidemic has no impact on industrial machinery. Observing Taiwan's industrial machinery...

Industry In-Focus

Three Models of Taiwanese Businessmen Entering the Mainland Electric Vehicle Supply Three models of Taiwanese businessmen entering the mainland electric vehicle supply Chain</h2>

Three Models of Taiwanese Businessmen Entering the Mainland Electric Vehicle Supply Three models of Taiwanese businessmen entering the mainland electric vehicle supply Chain

Feb 04, 2020

China is the world's largest producer and seller of electric vehicles. In 2020, electric vehicle sales will look at 2 million units, driving the rapid growth of industries such as batteries, connected cars, autonomous driving and charging equipment. Although the Chinese electric vehicle market is dominated by domestic production and domestic sales, due to the current lack of technology and R & D ...

Machinery tool booming in 2020</h2>

Machinery tool booming in 2020

Jan 21, 2020

he Taiwan Machine Tool & Parts Association held a joint meeting of supervisors and supervisors . The meeting was optimistic about the outlook for the machine tool and component industry next year. The joint board of supervisors and supervisors was chaired by Chairman Xu Wenxian. Industry representatives at the meeting believed that the global supply chain migration in 2020 was roughly finalize...

Taiwan Machinery Grab Biz Opportunity in India</h2>

Taiwan Machinery Grab Biz Opportunity in India

Jan 15, 2020

Organized by the Indian Machine Tool Association, the 2020 Indian International Metal Forming Machinery Exhibition (IMTEX FORMING) is the most influential metal forming machinery exhibition in Southeast Asia. The exhibition period is from January 23 to 28, and it will be held at the Bangalore International Convention and Exhibition Center in India. Out. In 2018, India was the fourth largest ex...

Supplier News

Power & Hard Industry Co., LTD.</h2><p class='subtitle'>crimping tools, steel-wire cutters, cable cutters, steel-rope cutters</p>

Power & Hard Industry Co., LTD.

crimping tools, steel-wire cutters, cable cutters, steel-rope cutters

Feb 05, 2020

Power & Hard Industry Co., Ltd. specializes in designing and producing professional pliers. Having been in the industry for over 20 years and rolling out their own brand called “Flying Fish,” the firm has largely concentrated on producing high-quality hand tools and various pliers as a professional manufacturer. Power & Hard Industry’s newly announced 17” Steel Wire & Cable Cutter has especially ...


Londa's LED Increased with More Automotive Lighting Market </h2>

Londa's LED Increased with More Automotive Lighting Market

Jan 16, 2020

In 2018, European and American international car manufacturers have automatically turned on the daytime running light function in new-style cars to reduce the accident rate. However, the trend of LED lights has become a major trend. In addition, active steering in advanced driver assistance systems (ADAS) Both headlights (AFS) and auto-adjustable headlight systems (ADB) have introduced LEDs one a...

A-Tina Co., Ltd.</h2><p class='subtitle'>Home Pair Tool, Power Tool Accessories, Household Tool Kit</p>

A-Tina Co., Ltd.

Home Pair Tool, Power Tool Accessories, Household Tool Kit

Jan 10, 2020

Founded in 1975 in Taichung, A-Tina Co., Ltd. is an industry leader in hand tools. With around 45 years of manufacturing experience, it can provide customization in accordance to client requirements. The company offers various tool cases in materials such as hollow molding in plastic, aluminum, iron, and nylon. and a wide variety of tool kits for different project purposes, including auto repair,...


Insiders' Views

Caption: Pictured from front row, third right, Changhua County Government Economic Affairs Department Director Liu Yu-ping, County Magistrate Wang Huei-mei, Secretary Chen Bo-tsun pose in front of the exhibition booth. (Photo provided by CHCIA)

Changhua County Government Shores up Biz-Matching to Global Buyers

Nov 18, 2019

■Yang Feng-Chun In a bid to assist manufacturers in Changhua County to expand their market reach overseas against severe competition in the globalized market, Changhua County Government has been an active player in pushing for a makeover and innovation of its local small and medium-sized enterprises. This is done in hopes of establishing stronger connection with international markets. An ex...

Paul Master offers high-quality chassis and engines parts for passenger cars, trucks, and industrial trucks. (Photo courtesy of Paul Master)

Paul Master Builds Reputation with Auto Chassis and Engine Parts

Nov 18, 2019

Founded in 1980, Paul Master Auto Parts Co. is headquartered in Taiwan, a professional manufacturer of chassis and engines parts for passenger cars, trucks, and industrial trucks including forklifts. General Manager Terry Liang said the company has its own professional design department, which provides customized products and specifications for global buyers, including automobile steering and...


Nan Hoang Traffic Instrument Co., Ltd.</h2><p class='subtitle'>Taiwan First brakes Technology Co., Ltd. </p>

Nan Hoang Traffic Instrument Co., Ltd.

Taiwan First brakes Technology Co., Ltd.

Sep 04, 2019

Nan Hoang Traffic Instrument Co., Ltd is one of the major manufacturers of automobile friction materials in Taiwan and globally. Chairman Austin Cheng has implemented the double-arrow strategy this year - own brand of “YangPo” is adopted to focus on global channels while the “NHC brand focuses on improving market shares in global markets, such as Europe, America, Asia, Australia, and the Middle E...

Exhibition Highlights

ITES 2020: COVID-19 Manufacturing Exhibition Crisis Response</h2>

ITES 2020: COVID-19 Manufacturing Exhibition Crisis Response

Feb 25, 2020

Since increasingly severe COVID-19 epidemic spread out in past 30 days, China economy has been dampened. Greater global connectivity and supply chain dependency on China and reliance on Chinese consumption currently, without a doubt, COVID-19 triggers a greater economic fragility. Emergent Production Adjustment As the fight against the novel coronavirus outbreak intensifies, Chinese local a...


Auto aftermarket experts to analyse prospects at Automechanika Dubai with ME market to reach US$18.5 bn by 2023

Feb 17, 2020

Growth indicators in the automotive industry will drive opportunities in aftermarket sales Dubai, UAE: The automotive aftermarket’s business prospects have been underlined by a valuation forecast of US$18.5 billion by 2023, and suppliers and manufacturers are now looking to Automechanika Dubai, the largest international trade show for the automotive aftermarket and service industry in the MEA ...

Fastener Expo Shanghai 2020</h2>

Fastener Expo Shanghai 2020

Feb 13, 2020

Opening Time: 3-5 June, 2020 Venue: National Exhibition and Convention Center (Shanghai) Organisers: Shanghai ITE Ebseek Exhibition Co., Ltd. Fastener Expo Shanghai 2020, has been deeply rooted in the industry for 11 years, and has always been developing and expanding with the purpose of being professional, efficient, open and innovative. It can be called the benchmark event in the gl...